MITSUBISHI MATERIALSCopper & Copper Alloy Business

MITSUBISHI MATERIALSCopper & Copper Alloy Business

Japanese

Products information

Oxygen free copper
Tough pitch copper
Phosphorus deoxidized copper

Standard No.
Oxygen free copper
JIS C1020 CDA C10200
Tough pitch copper
JIS C1100 CDA C11000
Phosphorus deoxidized copper
JIS C1220 CDA C12200

Copper with content over 99.90% is Pure copper, such as Oxygen free copper, Tough pitch copper,
Phosphorus deoxidized copper. The electrical conductivity, thermal conductivity of Pure copper are high.
The copper is provided in the respective shapes such as a plate, a strip(Up to 5mm thickness), and a bar by processing the high quality pure copper ingot.
The bendability, the formability and the corrosion resistance are superior also.

Main features

Oxygen free copper

The risk of hydrogen embrittlement (blowhole, cracking) during welding and brazing is low, because any oxygen is not contained. Oxygen free copper is recommended for the parts with welding and brazing.

Tough pitch copper

The content of copper is around 99.90%, it contains 200-500 ppm oxygen. The electrical conductivity, the thermal conductivity are same as Oxygen free copper.

Phosphorus deoxidized copper

A small amount of phosphorus is added. The electrical conductivity is 85%IACS, lower than Oxgen free copper (101%IACS). Phosphorus deoxidized copper is recommended for the parts with welding and brazing, because any oxygen is not contained.

Main applications

Oxygen free copper and tough pitch copper are used for;—

Bus bar, power module base plate, heat spreader, tab lead electrode for lithium ion battery, transformer coil material, gasket, Sputtering target

Phosphorus deoxidized copper is used for;—

Water heaters, air conditioning piping materials, construction, electric refrigerators for water supply, fuse caps

Bus bar
Bus bar
Heat sink
Heat sink for power module

Chemical composition

The chemical components of Oxygen free copper (C1020) are as follows.

(Weight %)

Cu
99.96Min
* Including inevitable impurities and trace additive elements

The chemical components of tough pitch copper (C1100) are as follows.

(Weight %)

Cu
99.90Min
* Including inevitable impurities and trace additive elements

The chemical components of Phosphorus deoxidized (C1220) copper are as follows.

(Weight %)

Cu P
99.90Min 0.03
* Including inevitable impurities and trace additive elements

Physical properties

It shows the physical properties of C1020 and C1100. Note: The average physical properties are shown.

Property Representative Value
Specific Gravity (293K) 8.94
Coefficient of Thermal Expansion
(×10-6/K:293~573K)
17.7
Thermal Conductivity
(W/(m・K):293K)
391
Volume Resistivity
(μΩm:293K)
0.0171
Electrical Conductivity
(%IACS:293K)
101
Modulus of Elasticity
(kN/mm:293K)
118

It shows the physical properties of C1220. Note: The average physical properties are shown.

Property Representative Value
Specific Gravity (293K) 8.94
Coefficient of Thermal Expansion
(×10-6/K:293~573K)
17.7
Thermal Conductivity
(W/(m・K):293K)
339
Volume Resistivity
(μΩm:293K)
0.0203
Electrical Conductivity
(%IACS:293K)
85
Modulus of Elasticity
(kN/mm:293K)
118

Mechanical properties (Sampling Direction : L. D.)

The mechanical properties of Oxygen free copper (C1020),tough pitch copper(C1100), Phosphorus deoxidized(C1220) are as follows.

  Temper
0 1/4H 1/2H H EH
Tensile Strength
(N/mm2)
195~255 215~275 245~315 275~345 315Min.
Elongation
(%)
35 25 15    
Vickers Hardness
(HV)
(60Max.) (55~75) (75~90) (90~105) (100Min.)
※ Vickers Hardness is reference value.

Inquiry

Strip & Plate

Rolled product Sales Dept.

TEL:+81-3-5252-4981

Bar & Rod

Group Ⅲ, Extruded Product & Wire Rod Sales Dept.

TEL:+81-72-233-9001

TOP